Check us out on social media!

Lucky Pennant Banner Tutorial

I know St. Patrick's Day isn't for a month, but I saw something on Pinterest for a Luck Pennant Banner made from paint chips/cards and the Irish in me wanted to make it immediately! So when Dad went to Walmart, I had him pick up a variety of various greens. Unfortunately, they didn't have much of a selection so some of the "white" pennants and letters/shamrocks are actually lime green. It's just hard to get that kind of green to come up in light.

Anyways, I decided to share with you how to make this Lucky Pennant Banner!

What you'll need:
10-15 paint chips/cards of various greens (You can get them for free at many stores. Just ask beforehand.)
Pencil with an eraser
Clear tape or glue (We used tape. I couldn't find the tacky glue. Oops!)
String or ribbon (We used fishing wire, since that was all we had at the moment)
Shamrock template (I cut one from a catalog.) You may need to resize them so they can fit on your pennants.

1. First, assemble all of your supplies. Then figure out how you want it to look before you start tracing and cutting.. You can do dark green, light green, dark green, light green, etc. Or you can do it the other way around.

2. Using your pencil, draw a pennant shape on one of the paint chip/cards. Start from one corner, and draw a straight line to the bottom of the other side. Use the picture below as an example.

3. Continue drawing pennants on 10 of the paint chips/cards. Once you're done, cut out the pennants and set them aside.
All 10 pennants
4. Using the other 5 paint chips/cards, write or draw "L", "U", "C", "K", "Y" in block letters. Be sure to save some room for your shamrocks! Cut out your letters.
"L" is for the luck of the Irish! :)
5. Now trace your tiny shamrocks and carefully cut those outs. We decided on 6 shamrocks. Our poor fingers!
Tiny little shamrock!
6. Once you have cut out everything, be sure to erase any pencil marks on your cut items. You don't have to, but it will look better.

7. Tape (or glue) the "L" to the first pennant of your choice, then tape/glue a tiny shamrock to the next pennant, and so on until you have a letter/shamrock thing going on. Depending on how many shamrocks you are willing to cut, we used 2 shamrocks on the last pennant (after the "Y").
Put the shamrock pennants between the letters, creating a spacer.
8. Arrange the pennants how you want the banner to look. Don't put away the tape yet! Flip each pennant over and loop the tape over your finger and place the tape about 1/2" away from the top of the pennant. This will allow whatever string or ribbon you have to pass through the tape loop. 

9. Starting with your last pennant, string whatever string or ribbon you have chosen from right to left. Otherwise, it might read backwards. Unless you know what "YKCUL" means, start stringing from right to left. If any pennants sit crooked, just re-position the tape until the pennant sits straight.

10. Hang and enjoy!

Now, hopefully your green colors are not as varied as our was. I promise you, there is NO white in this banner. They are all green, just some are lime green and some resemble pea soup.

We might have another paint chip craft in the works, but this time, it will make Easter a little brighter.

By the way, do you celebrate St. Patrick's Day?

1 comment:

Comments abusive in nature will be removed without notice.